Book A Table EQiblymamKC EQiblymamKC

First name : EQiblymamKC

Last name : EQiblymamKC

Email ID : taanakeif@gazeta.pl

Phone Number : 84896261866

No. Of Person : Array

Booking Date : 1980-11-10

Message :

Employing the Balanset-1A System

Getting the Equipment Ready

  • vibration sensors, optical speed sensor, magnetic base, software package, and included accessories.
  • Set up the instrument and connect it to your computer via USB. Verify that the software is correctly installed.

Setting Up the Sensors

  • Mount the vibration transducers securely on the machine’s housing where vibrations are most pronounced, typically near the bearings.
  • Position the laser tachometer (phase angle sensor) so that it is aimed at the rotor. Attach reflective tape to the rotor for accurate phase angle reading.

Launching the Software

  • Initiate the Balanset program on your computer.
  • Configure the software for either single-plane or two-plane balancing, based on the rotor’s characteristics and the desired outcome.


2-Camera_01

  • Bring the rotor to its normal operating rotational frequency.
  • The application will acquire data on vibration magnitude, rotational velocity, and phase angle to determine the initial imbalance state.

Attaching the Trial Weight


3-Camera-2_01

  • Bring the rotor to a standstill and affix a trial weight at a predetermined point on the rotor, specifying its mass in the software (typically in grams).
  • Resume rotor operation, and the program will capture the resulting changes in vibration amplitude and phase.


5-Camera_01

Computing the Compensating Weight

  • Using the acquired measurements, the program automatically determines the required corrective weight’s mass and angular position.
  • These parameters are displayed on the screen as numerical data and graphs.


Bs1 Manual

Attaching the Corrective Mass

  • Attach the computed compensating weight to the rotor as indicated by the software’s output.
  • Periodic checks can be performed to ensure the balancing procedure is effectively reducing the vibration.


1-Camera-2_01

Verification and Balancing Completion

  • With the compensating weight attached, operate the rotor and assess the level of any residual vibration.
  • The balancing procedure is finished if the remaining vibration is within the permissible limits specified in ISO 1940.
  • If the vibration level remains high, repeat the process with further weight adjustments.

Report Generation

  • The balancing results are saved in the software’s archive. You can create and print a report containing vibration data, correction weight mass, and its installation angle.

Concluding Steps and Verification

  • Verify the secure attachment of all balancing weights and measurement sensors.
  • Confirm that the rotor spins freely and quietly, without any unusual sounds or vibrations.
  • If the rotor is part of a complex mechanism, verify the proper interaction of all its components.

Instagram: https://www.instagram.com/vibromera_ou/
Youtube : https://youtu.be/guA6XJ-ArZM?si=vmkuX7RILzKBl0zL
Our website about Vibration mitigation
Machinio: https://www.machinio.com/listings/98380186-portable-balancer-vibration-analyzer-balanset-1a-full-kit-in-portugal
Facebook: https://www.facebook.com/marketplace/item/350151228150722

https://wiki.dailysocial.id/index.php?title=Fan_Balancing_Machine